Wilde 36pc Punch & Chisel Set K36.NP MADE IN USA
Wilde 36pc Punch & Chisel Set K36.NP MADE IN USA Wilde 36pc Punch & Chisel Set K36.NP MADE IN USA Wilde 36pc Punch & Chisel Set K36.NP MADE IN USA Wilde 36pc Punch & Chisel Set K36.NP MADE IN USA
$ 159.90

Description

K36 | 36-Piece Punch & Chisel Set in plastic molded case.

K 36 Includes 1 of Each

MFG # DESCRIPTION
CC 832 1/4″ x 4-3/4″ COLD CHISEL
CC1232 3/8″ x 5-1/4″ COLD CHISEL
CC1632 1/2″ x 6″ COLD CHISEL
CC2432 3/4″ x 7″ COLD CHISEL
CCL2432 3/4″x 12″ LONG COLD CHISEL
CD 632 3/16″ x 5″ DIAMOND POINT CHISEL
CP 832 1/4″ x 5-1/2″ CAPE CHISEL
CR 832 1/4″ x 5-1/2″ ROUND NOSE CHISEL
PC 832 1/4″ x 4-1/4″ CENTER PUNCH
PC1632 1/2″ x 6″ CENTER PUNCH
PLT 632 3/16″ x 9″ LONG TAPER PUNCH
PLT 832 1/4″ x 11″ LONG TAPER PUNCH
PLT1032 5/16″ x 11″ LONG TAPER PUNCH
PP 232 1/16″ x 4-1/4″ PIN PUNCH
PP 332 3/32″ x 4-3/4″ PIN PUNCH
PP 432 1/8″ x 5″ PIN PUNCH
PP 532 5/32″ x 5-1/4″ PIN PUNCH
PP 564 5/64″ x 4-1/2″ PIN PUNCH
PP 632 3/16″ x 5-1/2″ PIN PUNCH
PP 832 1/4″ x 7″ PIN PUNCH
PP1232 3/8″ x 7″ PIN PUNCH
PPL 632 3/16″ x 9″ LONG PIN PUNCH
PPL1032 5/16″ x 9″ LONG PIN PUNCH
PR 832 1/4″ x 4-1/4″ PRICK PUNCH
PS 232 1/16″ x 4-1/2″ SOLID PUNCH
PS 432 1/8″ x 4-1/2″ SOLID PUNCH
PS 832 1/4″ x 6″ SOLID PUNCH
PS1032 5/16″ x 7″ SOLID PUNCH
RS 232 1/16″ x 4-1/2″ ROLL SPRING PUNCH
RS 332 3/32″ x 5″ ROLL SPRING PUNCH
RS 432 1/8″ x 5-1/2″ ROLL SPRING PUNCH
RS 532 5/32″ x 6-1/4″ ROLL SPRING PUNCH
RS 564 5/64″ x 4-3/4″ ROLL SPRING PUNCH
RS 832 1/4″ x 7-1/4″ ROLL SPRING PUNCH
RS1232 3/8″ x 8″ ROLL SPRING PUNCH
RS1632 1/2″ x 9-1/4″ ROLL SPRING PUNCH

All Wilde punches and chisels are forged from high-carbon molybdenum tool steel and individually heat-treated to make them the toughest striking tools on the market. Wilde punches and chisels are hardened the entire length with a tempered striking end.
Chisel cutting edges are sharpened and re-sharpened to give the keenest points available.  Pin Punches have a reverse taper point which eliminates the punch from sticking in the work-place.
Chisels are designed to be re-sharpened once they become dull.  Care should be taken that excessive heat is not obtained when re-sharpening.  If the grinding temperature is not controlled, the hardness can be taken out of the immediate area. More importantly, a hard, brittle surface can be set which is very susceptible to fracture.